YOKOTA logo

 

 

General Catalogue

In this section, you will find a complete overview of the Yokota – Toku – Red Rooster product range. You will also find a brief introduction to specific equipment for lifting (air chain hoists) and to electronically controlled torque impulse wrenches, for which you will find more details in the next sections.

  • Impact wrenches: the Yokota – Toku – Red Rooster impact wrenches are equipped with a 1-hammer, 2-hammer, closed hammer, twin hammer or Dynapact mechanism and are designed both for industrial and automotive purposes. The Yokota – Toku – Red Rooster impact wrenches are available in pistol, angle or straight version with square drive from 3/8” to 2”1/2 and torque from 150 to 33.000Nm
  • Impulse wrenches: the Yokota impulse wrenches are designed for industrial purposes where high productivity and accuracy on torque are needed. The Yokota impulse wrenches are available in pistol, angle or straight version with square drive from 1/4” to 1” and torque from 9 to 600Nm
  • Ratchet wrenches: the Yokota – Toku – Red Rooster ratchet wrenches are available with square drive from 1/4” to 1/2” and torque from 32 to 120Nm
  • Impact sockets: in the Yokota product range you will find impact sockets for automotive purpose
  • Screwdrivers: the Yokota – Toku – Red Rooster screwdrivers are equipped with a 1-hammer, 2-hammer, direct drive or clutch mechanism and are designed both for industrial and automotive purposes. The Yokota – Toku – Red Rooster screwdrivers are available in pistol or straight version with 1/4” square drive and torque from 7,5 to 90Nm
  • Drills: the Yokota – Toku – Red Rooster drills are available in pistol, angle or straight version with power up to 500W and speed up to 5.000rpm
  • Grinders & sanders: the Yokota– Toku – Red Rooster grinders are available in pistol, angle, straight or vertical version with power up to 2kW and speed up to 100.000rpm. You will also find sanders, palm orbital sanders, belt sanders, wire brush sanders and polishers
  • Hammers: in the product catalogue you will find a wide range of Yokota – Red Rooster pneumatic hammers and Toku paving breakers and rock drills with reduced vibrations
  • Needle scalers: the Yokota – Toku – Red Rooster needle scalers are available in pistol or straight version
  • Saws: in the product catalogue you will find a wide range of reciprocating saws, pipe saws and chain saws
  • Pumps: in the Yokota product range you will find piston pumps for barrels and bronze sump pumps for sea water, corrosive and flammable fluids
  • Air chain hoists: the Toku – Red Rooster air chain hoists are used for lifting and material handling. They can be combined with push or air trolleys. The Toku – Red Rooster air chain hoists are available with capacity from 140kg to 100ton
  • Spring balancers: the spring balancers are used to support and hold pneumatic and electric tools in order to reduce operator’s fatigue and increase productivity
  • Air treatment equipment: a wide range of air treatment equipment such as filters, lubricators, regulators, condensers and driers

 Download Catalogue

 

 

 

Hi-Tec - Yokota Impulse Wrenches

HIGH SPEED PRODUCTION - HIGH QUALITY TIGHTENING

In this section, you will find a complete overview of the pneumatic Yokota Hi-Tec impulse wrenches. Electronically controlled torque impulse wrenches are used in the automotive industry for class A tightenings, for which high precision and repeatability are needed. We will also introduce the Poka Yoke+ and System Wrench electronic controllers.

  • Impulse wrenches: the Yokota impulse wrenches are designed for industrial purposes where high productivity and accuracy on torque are needed. The Yokota impulse wrenches are available in pistol, angle or straight version with square drive from 1/4” to 1” and torque from 9 to 600Nm
  • Impulse wrenches with and without shut-off: the Yokota impulse wrenches with shut-off device are designed for industrial purposes where high productivity and accuracy on torque are needed. The Yokota impulse wrenches are available in pistol version with square drive from 1/4” to 1/2” and torque from 4,5 to 210Nm
  • Cordless impulse wrenches: Yokota presents a wide range of torque controlled battery wrench with encoder with 3/8” square drive or 1/4” hexagonal drive and torque from 7 to 35Nm
  • Poka Yoke+: Yokota presents an electronic system to control torque through the measure of the pressure of the compressed air at the inlet of the motor
  • System wrenches: Yokota presents an electronic system to control torque with an integrated transducer on the main shaft of the tool
  • Electric system wrenches: Yokota presents the electric wrenches with integrated transducer on the main shaft of the tool with 3/8” or 1/2" square drive and torque from 3 to 90Nm
  • Battery system wrenches: Yokota presents the brand new cordless wrenches with integrated transducer on the main shaft of the tool with 3/8” square drive and torque from 7 to 60Nm
  • Sleeve Drive sockets

 Download Catalogue

 

 

 

Red Rooster Impulse Wrenches

PROFESSIONAL TOOLS FOR FASTER ASSEMBLIES

  • Shut-off Models & Non Shut-off Models
  • Sleeve drive sockets
  • Accessories

 

 

 

 

Download Catalogue

 

 

 

Red Rooster Shut-Off Screwdrivers

PROFESSIONAL TOOLS FOR THE ASSEMBLY INDUSTRY

  • Pistol, straight and angle models
  • Cordless Shut-off
  • Screwdriver
  • Impact sockets
  • Accessories

 

 

Download Catalogue

 

 

Toku & Red Rooster Air Chain Hoists

AIR CHAIN HOISTS FROM 0,125 TO 100 TON

In this section, you will find a complete overview of the product range of the Toku – Red Rooster equipment for lifting and material handling. Air chain hoists are available with capacity from 140kg to 100ton and can be used in combination with push or pneumatic, standard or low headroom trolleys.

  • Compact Hoists: the Toku – Red Rooster compact hoists are used for material hangling. They can be operated through cords or a pendant an can be combined with a push trolley. Capacity: 140kg or 250kg
  • Mini Hoists: the Toku – Red Rooster mini hoists are used for lifting and material handling. Available in the high-speed version, they can be operated through cords or a pendant and can be combined with a push or a geared trolley. Capacity: from 250 up to 1.000kg
  • Air Chain Hoists: the Toku – Red Rooster air hoists are used for lifting and material handling. Available in the high-speed version, they can be operated through cords or a pendant and can be combined with a push, geared trolley or air trolley. Capacity: from 1ton up to 100ton
  • Trolleys: Red Rooster offers a wide range of push trolleys, geared trolleys, air trolleys, low headroom air trolleys and ultra low headroom air trolleys for the movement of hoists on beams
  • Spark Resistant Hoists (ATEX Zone 1): Red Rooster offers a wide range of hoists for explosive environments with bronzed hook and stainless steel chain
  • Accessories ATEX

 

 Download Catalogue

 

 

 

Red Rooster Air Winches

AIR WINCHES FROM 0,2 TO 3,5 TON

 

 

 

 

 

 

 

Download Catalogue

 

Leaflets and Brochures

 

 

Battery System E-Wrench

The YOKOTA impulse wrenches are powerful, very accurate and most important, have no kick-back.

The YOKOTA System E-Wrench has a built-in torque transducer and angle-encoder on the main shaft and is wireless connected to a controller. Each controller can connect with up to 4 independently operating battery System E-Wrenches.

The YOKOTA battery System E-Wrench is the perfect solution for applications where cables or hoses are disruptive, but you still need to have all data checked, controlled and documented.

 

 

 

 

 

 

 

Download Catalogue

 

Red Rooster Battery Impact Wrench

Download Catalogue

 

Red Rooster Cordless Shut-Off Wrench

Download Catalogue

 

Yokota System Wrench Torque/Angle

Download Catalogue

 

Action Impact Sockets

Download Catalogue